04-13-2013 06:10 PM - edited 03-10-2019 08:18 PM
Is it possible to use the DRW feature with WLCs running 7.0 code? All configuration examples refer to 7.2 code. Its only for guest user device registration. No profiling / provisioning.
Compatibility matrix says that "Wireless Controllers support MAC filtering with RADIUS lookup. For WLCs that support version 7.2.103.0, there is support for session ID and COA with MAC filtering so it is more MAB-like."
Thanks.
04-13-2013 09:41 PM
Hi,
The reason you need to run the upgraded code is that the radius NAC feature coupled with a mac-filtering enabled SSID will work together. On the release prior you were unable to get both features to work with one another.
For your reference here is the item in the New Features section of the 7.2 WLC release notes:
http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn7_2.html#wp855314
thanks,
Tarik Admani
*Please rate helpful posts*
04-25-2013 09:30 PM
No, its not possible to use the DRW feature with WLCs running 7.0 code. You need to upgrade the IOS version to 7.2 code as recommended by Cisco to support all the features.
Please check the latest release notes of 7.2.111.3:
http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn7_2_111_3.html
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: