cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

778
Views
0
Helpful
1
Replies
Highlighted
Beginner

ISE - Guest sponsor portal

Hi Guys,

 

I'm running a small ISE deployment with one Admin and policy node. Lately I have created a custom "guest sponsor portal".

When I try to test the portal via "Portal Test URL" it open up the URL for admin node instead of the policy node "(https://xxx-adm-ise01.xxx.xxxxxx.com:8445/sponsorportal/PortalSetup.action?portal=5cbc5430-abe8-11ea-a3e8-12f264a5906f)"

How do i change this to prompt with policy node details?

Please advise.

 

Regards,

Suren

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
VIP Advocate

The sponsor portal test URL can pull up on any node running the policy service persona.  Sounds like you have incorrectly configured the policy service persona on your admin nodes.  In any event, just change the hostname in the test URL to point to the PSN and you are set.  If you setup a sponsor portal shortcut FQDN then configure that FQDN to point to your policy node.

View solution in original post

1 REPLY 1
Highlighted
VIP Advocate

The sponsor portal test URL can pull up on any node running the policy service persona.  Sounds like you have incorrectly configured the policy service persona on your admin nodes.  In any event, just change the hostname in the test URL to point to the PSN and you are set.  If you setup a sponsor portal shortcut FQDN then configure that FQDN to point to your policy node.

View solution in original post