This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.
I have 2 Large VMs and 4 Medium VMs on which I got a couple of concerns:
1) can I use the 2 Large VMs with 256GB memory as PAN + MnT with PxGrid?
I see the 256GB VM can be used for MnT only but can I use it in Hybrid Mode? https://community.cisco.com/t5/policy-and-access/differences-for-the-different-ise-vm-license-bundles/td-p/3377503
2) If 1 is possible, How many active endpoints can I have? I see 1,500,000 as per the sheet below
Solved! Go to Solution.
1. Yes, you can use Large VM as PAN + MNT+ pxGrid.256GB ram configuration is similar to SNS 3695
2. Even though, Large VMs used as PAN & MNT personas is enabled on a single node it is considered as a medium deployment. As per the scaling guide, you can go up to 5 PSNs max with 50k max concurrent session.
As an alternative option, you can get the same 50k concurrent session with 2 Large standalone ISE(v2.6) VMs.
Large VMs which I have mentioned is applicable in the case of ISE 2.6 & not with 2.4. The statement holds true for ISE v2.4 the Large VM is intended to use as a Super MnT node & not for meant for other personas.