12-02-2019 04:20 AM
Hi Team,
I wanted to confirm if mix/match standalone with distributed deployment is supported. For example is a following 3 node installation supported:
Node 1: PAN (P) + MnT (S) + pxGrid + PSN
Node 2: PAN (S) + MnT (P) + pxGrid + PSN
Node 3: PSN
Cheers,
Chris
Solved! Go to Solution.
12-02-2019 06:58 AM
The official answer from Cisco will be that it is NOT supported. But it will still work. If you ever have to open a TAC case for anything, they may refuse to help until you fix the deployment model.
12-02-2019 06:58 AM
The official answer from Cisco will be that it is NOT supported. But it will still work. If you ever have to open a TAC case for anything, they may refuse to help until you fix the deployment model.
12-02-2019 09:15 AM
@Colby LeMaire wrote:The official answer from Cisco will be that it is NOT supported. But it will still work. If you ever have to open a TAC case for anything, they may refuse to help until you fix the deployment model.
Are you sure about this? I have this deployment and it is recommended and supported by Cisco
Node 1: Primary Admin, Secondary MNT, PSN
Node 2: Secondary Admin, Primary MNT, PSN
What is the difference between my deploymnent and the original poster deployment, other than he has node 3 as PSN?
12-02-2019 09:36 AM
12-02-2019 10:25 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide