cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
4802
Views
5
Helpful
8
Replies

ISE Posturing and Split Tunnel

CCertified85
Level 1
Level 1

Hello All,

 

My posturing is working fine but i tried to enable Split tunnel from ASA it is not coming into effect

I asked Cisco TAC if we can push split tunnel ACL from ISE but as per Engineer it is not supported

 

My issue is i am getting 0.0.0.0/0 which will not be acceptable by Client as they need to access internet and other resources out of the tunnel

 

Please help