10-30-2019 11:54 AM
ISE v2.3
C3850 15.2
Hostname of C3850 was Sw14. It was rename Sw29, both on the switch (hostname command) and within ISE (Administration > Network Resources > Network Devices > ).
When looking at Live log, endpoint connecting into that C3825 are reported as connected to Sw14, the old name of the switch.
Is there something what we can do to have the new name of the C3825 appearing in the Live logs?
Thanks.
Solved! Go to Solution.
10-31-2019 03:53 PM
Hi @cpaquet
that's not normal at all. I just tested with ISE 2.4 patch 8 and when I rename the NAS in ISE, it reflects the new name back in the LiveLogs in under a minute. We are using an all-in-one ISE node, but in theory this should be the same for a distributed deployment.
I would not want to suggest any other drastic moves - best to get TAC involved.
10-30-2019 06:53 PM
I have noticed this too - it takes ISE a while to play catch up. Not sure why, but I think it's a side effect of the SQL database logic that's used under the covers. The PSN's may not have received the update in real time and they are the ones that send the SYSLOG events to the MnT. How long have you waited since the change took place?
10-31-2019 03:08 PM
Over 4 weeks ago.
10-31-2019 03:53 PM
Hi @cpaquet
that's not normal at all. I just tested with ISE 2.4 patch 8 and when I rename the NAS in ISE, it reflects the new name back in the LiveLogs in under a minute. We are using an all-in-one ISE node, but in theory this should be the same for a distributed deployment.
I would not want to suggest any other drastic moves - best to get TAC involved.
10-31-2019 03:58 PM
11-01-2019 11:32 AM
Ok, will call TAC.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide