09-06-2018 03:44 AM - edited 03-11-2019 01:49 AM
Hi,
sometimes in our 2.3 ISE Deployment replication errors show up in main dashboard
Here is the last one repeated for each not primary node
"Error while synchronizing EDF objects. Please re-sync the node Please re-sync the node".
Anyway in System->Deployment all nodes are marked as connected with "Sync Status:
0 messages to be synced."
Should the node be re-synced or not?
As far as I remember re.sync operation make the secondary node to restart and I don't want to reload a node just for e cosmetic issue.
Regards
Marco
Solved! Go to Solution.
09-06-2018 05:24 AM
I remember having this issue too and I have never seen it again in ISE 2.4 - I suspect it was a bug of sorts. We never manually sync'd our nodes. I may have raised a TAC case on this and they said it was "cosmetic". Rather err on the side of caution and open a TAC case. It's not an error that any customer should have to live with (or see, in the case of a "cosmetic" issues).
BTW: 2.3 was a terrible release. i'd make plans to move to 2.4 :)
09-06-2018 05:24 AM
I remember having this issue too and I have never seen it again in ISE 2.4 - I suspect it was a bug of sorts. We never manually sync'd our nodes. I may have raised a TAC case on this and they said it was "cosmetic". Rather err on the side of caution and open a TAC case. It's not an error that any customer should have to live with (or see, in the case of a "cosmetic" issues).
BTW: 2.3 was a terrible release. i'd make plans to move to 2.4 :)
09-06-2018 05:33 AM
Hi,
thank you for the reply. Unfortunately at the time we deployed ISE 2.3 was the only version available with the all the features we need. Actually it has lots of annoying (often "cosmetic") bugs on reporting side.
Hoping that 2.4 won't be worse...
Regards
MM
12-23-2019 11:00 AM
I am facing the same issue with ISE 2.6
Just up-graded the ISE from 2.2 patch 14 to 2.6 patch 3 but getting this alarm. All nodes looks good and in sync
Is there any how i can confirm that this is the cosmetic alarm only no any issue?
In the replication log i am not seeing any replication stopped alarm from ISE, is there any suggestion to get rid out of this situation?
12-24-2019 07:15 AM
Hi,
on our deployment we had faced this issue just when changing alarm settings and in order to get rid of the error messages we had to reload just MNT nodes. In the meantime we upgraded to 2.4 but to be honest I did not try to modify alarm settings since then, so I can't tell you if this "cosmetic bug" has been fixed, even if from what you are telling it seems still present in 2.6 . Maybe you can try and restart just MNT nodes .
Regards
M
12-24-2019 11:41 AM
@marco.merlo wrote:
Hi,
on our deployment we had faced this issue just when changing alarm settings and in order to get rid of the error messages we had to reload just MNT nodes. In the meantime we upgraded to 2.4 but to be honest I did not try to modify alarm settings since then, so I can't tell you if this "cosmetic bug" has been fixed, even if from what you are telling it seems still present in 2.6 . Maybe you can try and restart just MNT nodes .
Regards
M
Only the TAC will be able to dig deeper with you, please open a case if you have a concern
09-06-2018 05:43 AM
At the end I figured out the which configuration Items were not replicated.
They were changes on alarm settings (System-> Settings->Alarm Settings -> Alarm Configuration) and actually in order to see them work I had to re-sync at least PMN node
M
01-02-2020 05:14 AM
Is there any guide line to deal with the replication issue on ISE 2.6?
I am getting this alarm but in the deployment it looks like it is false alarm but wanted to confirm it, is there any way to identify this alarm status?
Here is the error message that i got for the replication error,
Replication Failed : Server=madlab03isemnt1; Message=Error synchronizing object: Resource[NAC Group:NAC:CoAType:ProfilerCoAType]; Operation: Update
---------------------------------
Replication Failed : Server=madlab03isepsn2; Message= Error while synchronizing EDF objects. Please re-sync the node
----------------------------------
These two type of error messages i can see inn the alarm but in actual deployment all looks good?
Does anyone has any suggestion on this?
03-16-2020 04:00 AM
This type of error:
Replication Failed : Server=madlab03isepsn2; Message= Error while synchronizing EDF objects. Please re-sync the node
was what we saw after we had applied the patch manually to the deployment.
Forcing a manual synchronisation of each node from the deployment screen- to transfer the whole database - resolves the issue.
03-17-2020 12:30 PM
yes that will resolve the issue and we did it but still we are getting the same error continuously. From the GUI and from the logs we can say that all the nodes are in proper sync but still we are getting that error.
I am trying to find a root cause for this issue.
Is there any idea for this issue?
09-21-2021 08:23 AM
Adding to the thread - I am still getting this supposed cosmetic error in ISE 2.7 patch 4.
02-27-2024 08:42 AM
Adding to the thread - I am still getting this on ISE 3.2.0.542 patch 2,3
03-19-2024 04:38 AM
+1
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide