cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1417
Views
5
Helpful
2
Replies

ise tacacs transations per second report

slevesqu
Cisco Employee
Cisco Employee

Hi,

Is there a way to get a report on TACACS+ transactions per second? A customer would like to see if he exceeds the performance metric or a standalone RADIUS/T+ to decide if he should change his design

Thanks

1 Accepted Solution

Accepted Solutions

hariholla
Cisco Employee
Cisco Employee

If you customer is running ISE 2.2, the they can pull the TPS from the ISE diagnostic report, however the TPS is not specific to TACACS+

Screen Shot 2017-07-20 at 3.07.00 PM.png

In earlier ISE build, the TPS data can be got via CLI

Screen Shot 2017-07-20 at 3.14.56 PM.png

Copying chyps to keep me honest here.

Cheers!

-Hari

View solution in original post

2 Replies 2

hariholla
Cisco Employee
Cisco Employee

If you customer is running ISE 2.2, the they can pull the TPS from the ISE diagnostic report, however the TPS is not specific to TACACS+

Screen Shot 2017-07-20 at 3.07.00 PM.png

In earlier ISE build, the TPS data can be got via CLI

Screen Shot 2017-07-20 at 3.14.56 PM.png

Copying chyps to keep me honest here.

Cheers!

-Hari

Hi Hari,

 

The TPS is mentioned in Avg. Can we know the duration of it ?

 

Regards,

Hiten R