11-01-2013 08:08 AM - edited 03-10-2019 09:03 PM
Hi all,
Documentation relating to TrustSec/ISE compatibility for the new Catalyst 3850 has been particularly hard to find (for me at least) or contradictory. I've looked at the TrustSec 3.0 matrix along with the ISE 1.2 Network Compatibility list, but the information there is not so great. The ISE compatibility list for the 3850 on IOS-XE 3.2.2 says that it supports SGA, while the release notes for that IOS-XE didn't claim support for this until the recent 3.3.0. Also this same documentation states that IOS device sensor is not yet supported, while the release notes for IOS-XE 3.2.2 claim "Enhanced BYOD Support" which describes the behavior (I think) of IOS device sensor.
I also haven't seen any documentation speak to SGT/SGA support on the 5720 WLC (other than it saying Yes for SGA on the ISE 1.2 compatibility list - which I'm not totally sure I can trust yet). Is this inherent now based on the 3850 supporting SGT/SGA in 3.3.0? I can't tell.
Does anyone have any hard facts about what is or isn't ready to go for the 3850 as it relates to TrustSec/ISE? Maybe you know of some good documentation/training material to link me to?
Thanks,
Dom
Sent from Cisco Technical Support iPhone App
Solved! Go to Solution.
11-01-2013 05:36 PM
Hi Dom,
Have not tried SGT/SGA but IOS device sensor is not supported on the 3850 3.3.0SE release.
Tried to get it going first and then I found a note about it's not working in this release.
You’ve probably seen it already, bu documentation Im using is:
Cheers
11-01-2013 05:36 PM
Hi Dom,
Have not tried SGT/SGA but IOS device sensor is not supported on the 3850 3.3.0SE release.
Tried to get it going first and then I found a note about it's not working in this release.
You’ve probably seen it already, bu documentation Im using is:
Cheers
11-04-2013 11:07 AM
Thanks, Mikael. I've started tearing through that documentation as well.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide