cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1378
Views
0
Helpful
2
Replies

ISE web auth for non-cisco switch(D-link 3528)

Hung Tsung Chen
Beginner
Beginner

Is it possible to use ISE(inline posture node) to redirect the wired users to ISE guest portal ?

And the wired users will get full network access after they pass the web auth.

 

1 Accepted Solution

Accepted Solutions

Bastien Migette
Cisco Employee
Cisco Employee

Hello,

It could theorically work if the switch is able to send all attributes in accounting packets, such as IP address and mac address in calling station-id. If the attributes are missing or incorrect, the iPEP ISE will never create the session (see show pep table session).

Being that said, that probably never have been tested, so you might want to reconsider your design as there are no guarantee this can ever work.

View solution in original post

2 Replies 2

Bastien Migette
Cisco Employee
Cisco Employee

Hello,

It could theorically work if the switch is able to send all attributes in accounting packets, such as IP address and mac address in calling station-id. If the attributes are missing or incorrect, the iPEP ISE will never create the session (see show pep table session).

Being that said, that probably never have been tested, so you might want to reconsider your design as there are no guarantee this can ever work.