03-27-2017 06:20 AM - edited 03-11-2019 12:34 AM
Hello All,
I have ISE 2.0 integrated with Cisco AIR 5520 WLC. I want to authorize wireless dot1x users based on the AP location. (Assign a different wireless vlan for each building floor).
How can I do this ? , Or Is there is any attribute on ISE that points to the AP group?
Thanks in Advance.
Mostafa
Solved! Go to Solution.
03-27-2017 06:35 AM
You can change the Calling Station ID to AP group on the controller. This is set under Security > AAA > Radius >Authentication. You can then use this Radius attribute to make decisions based on Calling station ID.
03-27-2017 06:35 AM
You can change the Calling Station ID to AP group on the controller. This is set under Security > AAA > Radius >Authentication. You can then use this Radius attribute to make decisions based on Calling station ID.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide