cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
711
Views
0
Helpful
1
Replies

ISE WLC Port bounce with NAC

Im having trouble renewing the IP address after a VLAN change after NAC Agent finishes its posture, the flow is as follows:

1. Wireless client access into the network, is 802.1x

2. NAC Agent succesfully validates posture and Coa is issued

3. I see the new Vlan for that client on the WLC, however my captures indicate that no dhcp renewal is issued from the PC to the DHCP Server

This is no guest access so the option for renew the VLAN dhcp is not a feasible one

any comments will be gladly received.

Thanks!

1 Reply 1

harvisin
Level 3
Level 3

Hello,

I went through your query and for the same I have found the link below which may help in solving it:-

http://www.cisco.com/en/US/docs/security/ise/1.1.1/user_guide/ise_client_prov.html

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: