07-26-2013 06:42 AM - edited 03-10-2019 08:41 PM
Hello.
I have PPTP server on my Cisco 3845 router with authentication on freeware TACACS+ server (Linux). TACACS set ACL and IP address for users.
Recently employers decide to migrate to L2TP over IPsec. Moreover old PPTP server should work.
Can I use TACACS server for authenticate L2TP users?
I have config like this on TACACS.
user = user1 {
chap = cleartext "password"
member = vpdn
service = ppp protocol = ip {
addr = 172.20.20.200
inacl=2005
}
}
Sorry for my Enflish.
Solved! Go to Solution.
07-30-2013 06:42 AM
Please see the below documnet. This document describes how to configure Layer 2 Tunnel Protocol (L2TP) with TACACS+. It includes sample configurations for L2TP Access Concentrator (LAC) TACACS+ servers, L2TP Network Server (LNS) TACACS+ servers, and routers.
http://www.cisco.com/en/US/tech/tk827/tk369/technologies_configuration_example09186a0080118d5f.shtml
07-30-2013 06:42 AM
Please see the below documnet. This document describes how to configure Layer 2 Tunnel Protocol (L2TP) with TACACS+. It includes sample configurations for L2TP Access Concentrator (LAC) TACACS+ servers, L2TP Network Server (LNS) TACACS+ servers, and routers.
http://www.cisco.com/en/US/tech/tk827/tk369/technologies_configuration_example09186a0080118d5f.shtml
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide