level 15 authorization on Cisco ASA

[jennyjohn]

I use tacacs+ for AAA in my Enterprise. On my ACSv4.1, I have created a user with privilege level 15. On every Switch in my enterpirse the user on authentication, directly goes to privilege mode (because he is level 15). But on ASA (ver 8.0) he is always prompted for an enable password.

Is there any method to directly go to the privilege mode on the ASA?

I could not find any aaa authorization commands to do this in an ASA.

Thanks in advance.

[Farrukh Haroon]

Jenny, this is how the ASA works. This feature was never implemented on the ASA in the same way it was done on the IOS platform.

Regards

Farrukh