Missing options on ISE

[Julio Coral Orbes]

Hi everyone

Im configuring an ISE demo, version 1.1.1.268, using the trial license included (100 base + 100 advanced). The ISE is installed on a Vmware ESXi host. The ISE image was downloaded directly from Cisco website.

I am configuring posture for av check, however i can't get many of the options that the ISE guide and documents shown. For example in the posture conditions, i don't see any AV vendor available, (see the attach) neither the default av check conditions.

am i missing some option, the version is wrong? any help would be appreciated.

Many thank in advance

[Richard Atkin · Accepted solution]

You need to let it connect to the internet to pull the latest AV updates from Cisco... Start here;

http://www.cisco.com/en/US/docs/security/ise/1.1/user_guide/ise_client_prov.html#wp1063651

I would also STRONGLY recommend that you update to 1.1.3 patch 1...     1.1.1 wasn't known for its stability

[Julio Coral Orbes]

Many Thanks Richard, i solved it...

The configuration required on the ISE GUI, was over tha path: Administration > Settings > Posture > and Updates. so i clicked on update button and enabled the option to allow automatic updates also. now i have all the posture options.

The implementation with 1.1.3 is a pilot on the lab before the complete implementation. this week we will receive the appliances and the first thing im going to check is the ISE version.