cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

843
Views
0
Helpful
0
Replies
Martin2m2
Beginner

MS Intune Posture assessment with ISE and Meraki network

See: https://www.cisco.com/c/en/us/td/docs/security/ise/3-0/compatibility_doc/b_ise_sdt_30.html

It is disappointing to see that there are so many restrictions in the combination Meraki switches and ISE:

12 dACL is not supported for Meraki switches.
13 Local Web Authentication is not supported for Meraki switches.
14 Only Meraki MDM is supported. Third-party MDM is not supported.
I would hope that 8 years after the take-over this would have progressed further. Especially now that there is the Meraki MS390 switch, which is basically Cisco hardware.
Is there any information about: ISE, MS Intune and posture assessment via Meraki MS switches? Can it work, will it work? How does it work?
And for the combination: ISE, MS Intune and posture assessment via Meraki MR access points?
- I say what I mean and I do what I say -
0 REPLIES 0
Content for Community-Ad