new certificate on acs 5.3

[jlhainy]

I generated a CSR to send to a CA (digicert). They sent me back a few files. To upload the new cert to acs 5.3 I assume I use the bind CA signed certificates option. Is a reboot or restarting of the acs services needed it does the new certificate just take affect after clinking finish?

Sent from Cisco Technical Support iPad App

[Jatin Katyal]

Yes, you need to use "Bind CA signed certificated" option. Look for step 13. in the below listed link.

http://www.cisco.com/en/US/products/ps10315/products_configuration_example09186a0080b4cdb9.shtml#installcert

In the newer version of ACS 5.3, it doesn't reboot/restart the ACS services. It will take effect just after clicking finish. You can find the complete steps here:

http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.3/user/guide/admin_config.html#wp1070939

Regards,

Jatin
- Do rate helpful posts -

[jlhainy]

Cool.  Thanks.  I wil give it a try.

[jlhainy]

I really have no way to test this.  Once I upload this certificate, I am currious how it will affect my wireless clients.  Will the clients get disconnected?  Will they just start using the new certificate with no interruption?  Will they have to delete and re set up the wireless profile?  I am wanting to update the certificate, but don't want to cause an unintended interruption of service.