ā02-15-2019 06:45 AM - edited ā03-11-2019 01:55 AM
Hi Experts,
Seems that Cisco will be moving to using C3PL more and more. I was going through the following documentation to learn more about new-style of configuration here
This documentation does explain how to get to do this C3PL configuration for dot1x and MAB. I was looking for some more examples on configuring posture and CWA from the switch.
Could anyone please redirect me to some more articles that talk about posture configuration and CWA using this new-style of configurations and use of the new-style commands.
ā02-15-2019 08:56 AM
ā02-18-2019 10:37 PM
I went through the document, but it still did not answer my question regarding setting up CWA using new-style of commands.
I am looking for such a document that gives pointers to commands of configuring the switch using C3PL for CWA and Dot1x
ā02-20-2019 08:51 AM
CWA is extension of MAB. It authenticates unknown MAC address and simply assigns redirect ACL and URL redirect string values as part of authorization to make webauth work. If you follow the document and configure ISE for CWA, should be enough to get CWA working on the switch with C3PL. It is similar for posture, only difference is posture is leveraging 802.1X instead of MAB to assign redirect ACL and URL redirect string values. Here is link to more recent guide for IBNS 2.0 (C3PL):
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide