cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

1460
Views
25
Helpful
2
Replies
old roo
Beginner

Passive ID for ISE 3.0

Hi All,

 

Am trying to setup Passive ID using the Agent in HA setup as per document below.

 

https://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/216512-configure-evt-based-identity-services-en.html#anc9

 

Has anyone had any success with this setup. All the troubleshooting offered in the document checks out fine. However not getting any session information in ISE.

 

The DC's are various versions, however the agents are installed on windows 2019 servers.

 

Have raised a TAC case as the GUI seems buggy and limited.

 

 

 

2 ACCEPTED SOLUTIONS

Accepted Solutions
howon
Cisco Employee

Please continue working with TAC on this.

View solution in original post

old roo
Beginner

ok the solution to this was a patch (4) as issues was caused by a bug on the MnT Nodes. This affected the passive ID functionality and licensing, where both would function upto 4 hours after rebooting the nodes, then cease to function again.

View solution in original post

2 REPLIES 2
howon
Cisco Employee

Please continue working with TAC on this.

old roo
Beginner

ok the solution to this was a patch (4) as issues was caused by a bug on the MnT Nodes. This affected the passive ID functionality and licensing, where both would function upto 4 hours after rebooting the nodes, then cease to function again.

Create
Recognize Your Peers
Content for Community-Ad

ISE Webinars


Miss a previous ISE webinar?
Never miss one again!

CiscoISE on YouTube