Hi friend,
Someone could help me about authenticate phone Mitel in ACS 5.2. I tried to authenticate a PC wich is behind of phone Mitel, but it doesn´t working.
the solution work fine with vlan mapping.
This configuratión work fine with Phone Cisco but not for phone Mitel, and I had used this templace by both.
vlan 709 = guest
vlan 10 = voice
inter fas 1/0/8
switchport access vlan 709
switchport mode access
switchport voice vlan 10
authentication event fail action authorize vlan 709
authentication event no-response action authorize vlan 709
authentication host-mode multi-domain
authentication port-control auto
authentication periodic
authentication timer reauthenticate 60
authentication violation protect
mab
dot1x pae authenticator
dot1x timeout tx-period 10
dot1x max-reauth-req 3
spanning-tree portfast
Best Regard.
Marco