cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
150
Views
0
Helpful
1
Replies

RADIUS Debug Time-stamp Differs from Local Device Time-stamp

rtmiles24
Beginner
Beginner

I recently configured RADIUS for our network devices. During the debug process I noticed the time-stamp of the RADIUS debug output was different (4 hours ahead) from the local NTP synchronized device. However, the time on the WIN 2012 server I am using for RADIUS matches that of the NTP synchronized device. Can anyone tell me why this is happening and how to "fix" it if possible? I've done some research and found no answers as of yet. Thank you for your time.

EX:

May 17 13:44:58.506: RADIUS(00000284): Received from id 1645/5

sh clock
09:45:10.485 EST Tue May 17 2016

1 Reply 1

jan.nielsen
Rising star
Rising star

I'm pretty sure you need to tell the switch to mark logs with timestamps using the locally configured timezone.

service timestamps log datetime localtime show-timezone

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: