cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

204
Views
5
Helpful
4
Replies
StuartR
Beginner

RADIUS problem on new ISE 1.4 installation

HI,

I'm having an issue with a new ise installation. I have 4 3415 nodes with which were all upgraded out the box from 1.3 to 1.4.

I'm testing used a ASA configured for ssl vpn termination. The policy nodes are getting the radius packets, but are they being dropped with no response.

I'm seeing nothing in the operations logs, or any of the reports regarding dropped packets or misconfigurations.

I'm not sure what else I could check before logging a tac case.

 

Regards

Stuart

4 REPLIES 4
jan.nielsen
Rising star

Can you ssh to the psn's, if so, what interface number has the ip address ?

Hi,

 

The interfaces were good after the upgrade. I'm guessing I was affected by the bug below even though I was doing an upgrade from a new 1.3 to 1.4. Doing a clean build from the 1.4 iso has fixed the issue.

ISE 1.3p2 upgrade to 1.4 breaks iptables rules - all radius dropped CSCuu43966

Great info Stuart, will have to watch out for that one, hopefully it'll be fixed soon

I think I was affected by this bug. I will try a fresh install from the ISO too.

Thanks Stuart

Content for Community-Ad