cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Announcements
Choose one of the topics below to view our ISE Resources to help you on your journey with ISE

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

553
Views
10
Helpful
3
Replies
Highlighted
Beginner

 radius-server question for ws-3850 switch

I'm putting my ssh configuration on a cisco 3850 switch IOS is 03.03.02SE…………….but when  put in the following command?

 

  • radius-server host server-1 auth-port 1645 acct-port 1646 key XXXXXXXXXX

it get this notification:

Switch(config)#radius-server host server-1 auth-port 1645 acct-port 1646 key 123456

Warning: The CLI will be deprecated soon

'radius-server host server-1 auth-port 1645 acct-port 1646 key 123456'

Please move to 'radius server <name>' CLI.

 

What does this mean?..............and what is the correct way for me to put this command in?....

3 REPLIES 3
Highlighted
Rising star

It indicates the newer IOS

It indicates the newer IOS version would not support that command , new command would be " radius server name "

Highlighted
Enthusiast

just to share: If you have

just to share:

  • If you have configured an IPv4 RADIUS server, you can use either the radius-server host command or the radius server name command.
  • If you have configured an IPv6 RADIUS server, use the radius server name command.
Highlighted
Beginner

Per another forum...........

Per another forum...........

!

The new syntax is given this link:

https://supportforums.cisco.com/discussion/11464936/radius-2960-and-2955

radius server AAAISE1

address ipv4 10.19.250.50 auth-port 1812 acct-port 1813

key 7 01115506555E172F32

!

radius server AAAISE2

address ipv4 10.19.250.51 auth-port 1812 acct-port 1813

key 7 130744101444150A38