Replication ACS 3.2

[jine]

Hi,

I have a problem with the REPLICATION between two

server RADIUS.

The message is Error (-1048) trying to contact ACS 'SEC-ACS02'

Can you help me ?

my e-mail : j.ine@libertysurf.fr

Thanks

[gfullage]

This simply looks like the two ACS servers can't communicate with each other. Verify there's no firewalls or anything blocking access to TCP port 2000 between the servers. what does the replication log on SEC-ACS02 show, anything? If it doesn't show anything then there's a good chance the request form the primary server is not even getting to this server. If it is getting there and 02 is simply misconfigured then the error log will give you more detail.

Also make sure that the two versions are EXACTLY the same on both servers, otherwise replication won't work.

[jine]

It's OK

I commit two mistakes :

1. the key wasn't the same between the primary and the secondary server. I'm confuse...very confuse...

2. In the secondary configuration, the AAA secondary server was not specified.

Thanks for your help