cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2927
Views
0
Helpful
3
Replies

Resizing ISE VM

virtualpedia
Level 1
Level 1

I have a question in regards to modifying the ISE VM.   If you have a small VM license, can you increase the disk size prior to initial power on, after deploying the OVA,  or does that break license?

 

For example, small VM shows 600GB,  prior to initial power on, can you change it to 800GB?

1 Accepted Solution

Accepted Solutions

Damien Miller
VIP Alumni
VIP Alumni

You can expand the disk, however ISE will not take advantage of it. You need to reinstall the application/VM from the ISO in order to take advantage of the additional disk space. The small VM license is based on the CPU and memory assigned the node, you can have any disk size you want up to around 2TB.  

 

You have two supported options to increase the disk space, but both require the ISO. 

1. Deploy the OVA, increase the disk to 800 GB, mount the ISO, boot from the ISO and reinstall.

2. Deploy the VM straight from ISO, building your own VM template.  This is OK if you know the exact cpu/disk settings for a small VM already. 

If you adjust the disk at any point from 600 to 800 without the reinstall from the ISO, then ISE will only ever see the original 600. 

View solution in original post

3 Replies 3

balaji.bandi
Hall of Fame
Hall of Fame

DUPLICATE

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

virtualpedia
Level 1
Level 1

Actually, the post you linked is the duplicate, I didn't want it to security blog section

Damien Miller
VIP Alumni
VIP Alumni

You can expand the disk, however ISE will not take advantage of it. You need to reinstall the application/VM from the ISO in order to take advantage of the additional disk space. The small VM license is based on the CPU and memory assigned the node, you can have any disk size you want up to around 2TB.  

 

You have two supported options to increase the disk space, but both require the ISO. 

1. Deploy the OVA, increase the disk to 800 GB, mount the ISO, boot from the ISO and reinstall.

2. Deploy the VM straight from ISO, building your own VM template.  This is OK if you know the exact cpu/disk settings for a small VM already. 

If you adjust the disk at any point from 600 to 800 without the reinstall from the ISO, then ISE will only ever see the original 600. 

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: