I was setting up Self-Registration portal for Guest network in my network using Cisco WLC and Cisco ISE. I was able to setup the config as per recommendation in YouTube link https://www.youtube.com/watch?v=KYfdAQciOVE. However When end user trying to connect to SSID which i have created for Self Registration not redirecting to Self Registration portal and directly getting to internet.
I am Using Cisco ISE 2.6 with Patch 7 and Cisco WLC 2504 with 8.2.170 version.
Thanks in Advance.
Solved! Go to Solution.
It could be a number of things. On ISE Radius Live Logs, make sure the user is hitting the correct authorization policy rule. If so, open the details of a successful authentication and scroll down to the bottom left. You will see the Radius attributes that are pushed to the WLC. Make sure you see your redirect ACL and redirect URL and that they are correct.
On the WLC, you can go to Monitor->Clients and look for your device's MAC address. Open it up and scroll down. You should see an entry for something like AAA Override ACL. Make sure that is the correct ACL.
If all of that is good, then verify the ACL and make sure you are only permitting access to the ISE nodes, DHCP, and DNS.
Check if you are missing any parameter as per the below config, even though it is for ISE 1.3 but the configuration is same: