01-24-2011 06:11 AM - edited 03-10-2019 05:44 PM
In the output of the show ntp in the ACS v5.1, What is the succesfull output of the show ntp ? I have the following output, the first show GPS and the second INIT
acs/admin# show ntp
Primary NTP : 200.54.X.X
synchronised to NTP server (200.54.X.X) at stratum 2
time correct to within 25 ms
polling server every 64 s
remote refid st t when poll reach delay offset jitter
==============================================================================
127.127.1.0 LOCAL(0) 10 l 50 64 377 0.000 0.000 0.001
*200.54.X.X .GPS. 1 u 57 64 377 32.320 11.092 5.510
Warning: Output results may conflict during periods of changing synchronization.
acs/admin(config)# do show ntp
Primary NTP : 10.39.X.X
synchronised to local net at stratum 11
time correct to within 12 ms
polling server every 128 s
remote refid st t when poll reach delay offset jitter
==============================================================================
*127.127.1.0 LOCAL(0) 10 l 24 64 377 0.000 0.000 0.001
10.39.X.X .INIT. 16 u - 64 0 0.000 0.000 4000.00
Warning: Output results may conflict during periods of changing synchronization.
01-25-2011 08:57 AM
This is what my output is from my lab setup:
ciscoacs1/acsadmin# sh ntp
Primary NTP : time.nist.gov
synchronised to local net at stratum 11
time correct to within 12 ms
polling server every 1024 s
remote refid st t when poll reach delay offset jitter
==============================================================================
*127.127.1.0 LOCAL(0) 10 l 41 64 377 0.000 0.000 0.001
192.43.244.18 .ACTS. 1 u 7 1024 377 50.375 3261463 3261463
Warning: Output results may conflict during periods of changing synchronization.
06-03-2011 04:49 AM
This is a AAA related question, so moving it to AAA community.
Vinay
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: