Solaris users integration with Radius ACS 5.0

[Muhammad Anser Khan]

Dear All,

Can anyone help me in the following scenario:

Solaris users need to authenticate with Cisco ACS 5.0 as a radius server.

How to configure ACS 5.0 for this? Which radius attributes do I need to configure? Do I also need to add vendor Id for solaris 10?

Waiting for your responses.

Regards,

Anser

[Tarik Admani]

After doing some searching it looks as if you will need to add a PAM to Radius module which will give you the ability to authenticate users via radius. If you can get this far try to run debugs or look at the monitoring and reports to see what we are getting from the solaris server, then you can create a custom dictionary if you receive anything distinct in the access-request from the solaris clients and then create authorization profiles.

I hope this helps get this project started.

Tarik Admani

[Muhammad Anser Khan]

Can you tell me how to add PAM in ACS?  Do you have any good documents for this?

[Tarik Admani]

This module is for the solaris server, if you google for this module I am sure you can find it.

Thanks,

[Muhammad Anser Khan]

Can you please guide which radius attributes I need to add in ACS 5.0 for PAM?

Can you refer any good documents?

Regards,

Anser