cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1752
Views
0
Helpful
2
Replies

Sponsor Portal

Tutu
Level 1
Level 1

Hello,

Im am trying to create Guest Wired access on cisco ISE and i am not able to login using the guest users i created through the sponsor portal.

 

Please help.

2 Replies 2

Did you follow the guest implementation guide to make sure that all
required steps are implemented? If yes, then you need to describe that type
of error message appearing when you login and check ISE logs to see what is
happening.

Here you go.

https://community.cisco.com/t5/security-documents/ise-guest-access-prescriptive-deployment-guide/ta-p/3640475

**** please remember to rate useful posts

Tutu
Level 1
Level 1

Dear Mohammed,

 

Yes i have follwed that but for wired access.

Please see my attached screenshots.

 

My switch config is

ip access-list extended ACL-ALLOW
permit ip any any
ip access-list extended ACL-WEB-REDIRECT
permit tcp any any eq www
permit tcp any any eq 443
deny ip any any
ip access-list extended REDIRECT
deny udp any eq bootpc any eq bootps
deny udp any any eq domain
deny ip any host 10.200.222.82
permit ip any any

 

guestaccess1policy.pngguestprofile.pngwebauthpolicyguest2.png

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: