I am tring to run an auto exec command when I login directly to the console I want to be authorized directly to the enable mode. Authorization to the telnet directly to the enable mode works fine from telnet just not from the console. Below is my relevent config. Thanks in advance.
aaa authentication login default group Networking enable
aaa authentication login console group Networking enable
aaa authorization exec default group Networking if-authenticated
aaa authorization exec console group Networking if-authenticated
aaa accounting exec default start-stop group Networking
aaa accounting exec console start-stop group Networking
line con 0
authorization exec console
login authentication console
transport input none
stopbits 1