Unable to Authenticate Check Point (GAIA R76) and ACS 5.2 using TACACS+
Hi, We are trying to authenticate a Check Point Firewall(GAIA R76) to a 5.2 ACS using TACACS+
We are able to authenticate the user OK but when we do a 'tacacs_enable TACP-15' to get elevated privileges the session hangs and gives 'internal error' message.
On the ACS the shell profile is set for Privilige 15 (The Check Point) manual says that no other TACACS+ attributes need to be applied.
On the Check Point we have installed SecurePlatform_HOTFIX_GIZMO_HF_BASE_389 which contains a rolled-up set of TACACS patches. Also we have been able to get this working with the IPSO Check Point's so this seems to be specific to GAIA's
Hello team I have configured guest access on ise which is working fine.But rigth now when requestion access, guest can put 4 numeric value in phone number fields. How to force use filling the account creation form with a minimum of 8 numer...
QuestionHello , somebody know if it´s possible to remove the device registration status from the MyDevices portal for the spanish page?By default the status is dispalyed (registered/Pending), this condition was fixed in the english page after load a...
Dears, Please note that I have ASA 5515 running version 9.4.(4)20 and managed through FDM. In addition, I have FMC version 184.108.40.206 for the IPS. I need to upgrade the only the ASA to the latest supported version that work with the FMC version 6.0...
To participate in this event, please use the button to ask your questions
This topic is a chance to clarify your questions about Cisco Threat Response, from its components and new features to ...
Community Live Slides- How to optimize your Cisco Security investments with Threat Response
(Live event - formerly known as Webcast- Tuesday February 18, 2020 at 10 am Pacific/ 1 pm Eastern / 7 pm Paris)
This event had place on Tuesday 18th, Februa...