cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Announcements
Choose one of the topics below to view our ISE Resources to help you on your journey with ISE

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

4195
Views
0
Helpful
5
Replies
Highlighted
Participant

upgrade ACS 5.3 to 5.4 fails

Hello,

I try  upgrade ACS 5.3.0.40 to new version 5.4.0.46. Everything looks ok:

ACS-machine/acsadmin# application upgrade ACS_5.4.0.46.tar.gz rep01

Do you want to save the current configuration ? (yes/no) [yes] ?

Generating configuration...

Saved the running configuration to startup successfully

% CARS Install application required post install reboot...

Broadcast message from root (pts/0) (Thu Dec  6 23:36:41 2012):

The system is going down for reboot NOW!

Application upgrade successful

But ACS machine (vmware instance) can't boot with this result: Volume group "smosvg" not found. (for details see attachment)

Any ideas?

--

martin

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Beginner

Did you install patch 8 on the 5.3.0.40 before upgrading to 5.4?

Maybe you are running into CSCuc93106..

edit:

ehhmm .. unlikely.

View solution in original post

5 REPLIES 5
Highlighted
Beginner

Did you install patch 8 on the 5.3.0.40 before upgrading to 5.4?

Maybe you are running into CSCuc93106..

edit:

ehhmm .. unlikely.

View solution in original post

Highlighted

joopv,

of course I have no patch installed! before upgrade to 5.4 is needed patch 6 or higher (patch 7, 8).

thanks.

--

martin

Highlighted

Hello joopv,

after successfully installing patch 8, upgrade to 5.4 has the same issue - kernel panic after reboot to 5.4. Any idea?

--

martin

Highlighted

Martin,

How much disk space did you allocate for ACS when you initially created the VM?

Javier Henderson

Cisco Systems

Highlighted

Javier,

it was long time ago, I can't remember. But I think, there was enough space (based on install/upgrade guide).

In the final, I exported configuration from version 8.3, then install fresh 8.4 and import saved configuration. I had two ACS boxes, therefore whole upgrade was without interuption 'radius services'.

martin