01-02-2022 07:41 AM - edited 01-02-2022 07:42 AM
Hi can I verify the below are all I need to backup ?
1. Configuration Backup
2. Operational Backup
3. ISE Certificates
how about those IP address I configure for the interfaces in the initial setup, are they part of item 1 - Config Backup or do I need to login to the CLI , do a "show run" and copy out the configuration ?
Thanks,
Desmond
Solved! Go to Solution.
01-02-2022 04:03 PM
Hi @Desmond Lee ,
the Configuration Backup contains both application-specific (ISE) and Cisco ADE OS configuration data ((like hostname, IP Addr, NTP, enabling SSH, default gateway and name servers). The Operational Backup is simply just the RADIUS and TACACS logs (contains the MnT data) !!!
Note: restoring the ADE-OS configuration would be used if you want an exact duplicate of the ISE server the backup was taken from.
Hope this helps !!!
01-02-2022 04:03 PM
Hi @Desmond Lee ,
the Configuration Backup contains both application-specific (ISE) and Cisco ADE OS configuration data ((like hostname, IP Addr, NTP, enabling SSH, default gateway and name servers). The Operational Backup is simply just the RADIUS and TACACS logs (contains the MnT data) !!!
Note: restoring the ADE-OS configuration would be used if you want an exact duplicate of the ISE server the backup was taken from.
Hope this helps !!!
01-02-2022 05:12 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide