cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2159
Views
0
Helpful
2
Replies

Will Cisco ISE appliances answer SNMP queries ?

jmendesfilho
Level 1
Level 1

Hello,

It is clear that ISE is able to send SNMP traps to a remote SNMP manager machine. It seems to be embeded on Cisco Application Deployment Engine (ADE) OS and explained on this documentation:

http://www.cisco.com/en/US/partner/docs/security/ise/1.1/cli_ref_guide/ise_cli_app_a.html#wp1014133

However it is not clear if ISE machines, regardless service persona type installed, will repond to SNMP queries coming from a remote SNMP manager.

Will ISE appliances respond to SNMP queries, provided SNMP configuration is fine on ADE OS ??

I would like to have a remote NOC to monitor first if ISE machine is up/down before a potential remote login on ISE for further troubleshhoting.

Thanks in advance for your help.

Jorge Mendes

2 Replies 2

Shaoqin Li
Level 3
Level 3

the comminity should be read only.

and you can do an snmp walk to check the information.

ISE will also send out trap when certain event happens, like boot up, interface up/down, etc.

Sent from Cisco Technical Support iPad App

kaaftab
Level 4
Level 4

Solution

Yes ISE will reponsed to the query and A similar  query is already discussed on the following page with solution to what is asked

https://supportforums.cisco.com/thread/2165257

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: