This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.
I am using Cisco Wlc 2504 and Cisco ISE 2.4 in my environment right now. I have a remote location what is connected to my main location. Recently I have installed and configured one more AP at my remote location in Flex Connect mode. I have configured authorization of remote location SSID with ISE, but for some reason users randomly get disconnected.
What could be the issue here?
There are many reasons.
1. provide the version WLC code - AP Model and core running.
2. How many effected
3. how many users per AP connected if all working ?
4. how is your network stability ?
*** Rate All Helpful Responses ***
My recommendation would be to run some debugs from the WLC for the client/s having the issue. Should be something along these lines:
debug mac addr ####
debug client <mac>
debug aaa all enable
debug disable all