cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1205
Views
0
Helpful
1
Replies

WPA2 Guest Portal

victguti
Level 1
Level 1

Hello,

I would like to configure wireless access for guests using a guest portal. For security policies, an open SSID cannot be used and it has to use WPA2. Initially, a key will be provided to the guest for connecting to guest wireless network (WPA2 key) and then, an authentication through the guest portal will be also required before granting full access.

I know this kind of configuration was not possible before and I would like to know if we can be implement it now with new ISE and WLC software versions.

Thanks,

Víctor.

1 Accepted Solution

Accepted Solutions

Jason Kunst
Cisco Employee
Cisco Employee

Did you see this thread?

https://communities.cisco.com/thread/72609

I know wpa-psk and wpa dot1x work with redirection. Not sure about wpa2 non dot1x

If need anything more reach out to the wireless team

View solution in original post

1 Reply 1

Jason Kunst
Cisco Employee
Cisco Employee

Did you see this thread?

https://communities.cisco.com/thread/72609

I know wpa-psk and wpa dot1x work with redirection. Not sure about wpa2 non dot1x

If need anything more reach out to the wireless team

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: