2960-X IOS version

[ahmedabu_klam79@yahoo.com]

Which IOS version for the SW 2960 X 12.2 (XX)SE(X) will support the Track command

because I have 2960-X with IOS version 12.2(55)SE7 but not supporting the Track command that I want to use it with The IP SAL

[balaji.bandi]

Look at the feature navigator :

http://cfn.cloudapps.cisco.com/ITDIT/CFN/jsp/SearchBySoftware.jsp

[David Castro F.]

Hello Ahmedabu,

I hope you are doing great,

Depends on the track feature you are looking for, there is "LST= Link State Tracking", enhanced object tracking and so on, below the images where the feature is introduced for the particular series switch you have:

Feature Information for Link-State Tracking

Releases	Feature Information
Cisco IOS Release 15.0(2)EX	This feature was introduced.

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960x/software/15-0_2_EX/layer2/configuration_guide/b_lay2_152ex_2960-x_cg/b_lay2_152ex_2960-x_cg_chapter_011.html

IP SLA 

15.2.5E, with the iplite version.

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960x/software/15-2_5_e/configuration_guide/b_1525e_consolidated_2960x_cg/b_1525e_consolidated_2960x_cg_chapter_01001111.html#reference_1DF352B4261644058DBCD6DA21F55580

Also in order to effectively find the feature you need you can track it here:

http://cfn.cloudapps.cisco.com/ITDIT/CFN/

Keep us posted, please qualify all of the helpful answers!

Thanks,

David Castro,

[ahmedabu_klam79@yahoo.com]

thanks for the help, that will help me to check this IOS version

[David Castro F.]

Awesome, If you feel that both answers provided answered your question, could you please Mark both as the answered? So the community Will see that this thread is answered.

Otherwise keep us posted if you have any questions.