Hi All ,
I have a doubt regarding aaa authorization command . I have logged in to the Device using my TACACS ID now I removed the aaa authorization command specifically
no aaa authorization commands 15 default group tacacs+ local
I am currently experiencing the below issue.
I have about 300 clients connected to an SSID and only 20 of them have managed to receive IP's. These are not geographically linked to each other (for instance, 2 people could be stan...
I've a Cisco Switch running IOS 12.4 but it seems impossible to configure an ACL to restrict access to a particular IP outside the network i.e. on the internet.
When I used "deny ip" or "deny tcp" and applied "IN" ACL ...
Hi , need help frm master to interpret the config below in ASA fw.many many thanks!
1)The NAT will happen whenever traffic flows from vlan-wlan->outside & vlan-mls->inside?
2)ASA will perform nat when doing nat configuration under "obj...
I have one very old router which is Cisco ASR1000x thus I wanted to try REST api
and also wanted to know how many features of REST api in this product ?
the required scope like a simple feature (GET,POST,PUT,DELETE) for retrieve ...