In this session you can learn more about Layer 3 multicast and the best practices to identify possible threats and take security measures. It provides an overview of basic multicast, the best security practices for use of this technology, and recommendations for how to configure an auto rendezvous point (RP) and Bootstrap (BSR) in multicast protocols, with particular focus on RP distribution methods. The event includes a live demonstration of Layer 3 multicast technology.
Agenda • Introduction • Multicast basics • Auto RP, BSR (RP distribution methods) • Possible threats and security measures • Demonstration
Luis Espejel is the Telecommunications Manager of IENova, an Oil & Gas company. Currently he works with Cisco IOS® and Cisco IOS XE platforms, and NX to some extent. He has also worked as a Senior Engineer with the Routing Protocols team in Cisco’s Global Technical Assistance Center (TAC), as a Network and Telecommunications Manager for GM’s Mexico subsidiary, and in the Engineering Department for Axtel, a major Internet Service Provider. Luis holds an Electronics and Communication degree and postgraduate degrees, one in marketing and one in telecommunications. He has several certifications such as Google Power Search, ITIL foundations, Certified Ethical hacker, CCNA in DC, Cybersecurity Specialist, and a CCIE in R&S (#52804) among others.
David Ramirez is a Network Engineer at Astra Zenca pharmaceutical, where he works on IWAN implementation projects and LAN refresh and migrations to 10 Gig Fibre ring network. Previously he worked as a Support Engineer for Cisco’s TAC Routing Protocols team, as a Deployment Engineer of Value Added Services (Voicemail and Multimedia Messaging Services for Mobile Telephony), and as a Telecom Associate Engineer at Getronics where he provided routing and switching support to several customers in the US and UK. David holds a Bachelor’s Degree in Electronics and Communication Engineering and diverse certifications such as ITIL Foundations, Microsoft Certified Professional, Cisco CCNA, and Cisco CCIE R&S-written only.
This is the example build I am trying to setup. There will be 3 firewalls (Internal Systems, HQ, and Branch). The Internal System Firewall is behind another firewall that is connected to our ISP. The internal Systems firewa...
I need to be able to detect which route-map is applied to a BGP neighbor in an EEM script.
if route-map PRIMARY is configured on neighbor x, then run the command "standby 80 prio 160"
if route-map BACKUP is configured on neighbor x, ho...
I have a 4510R+E that is utilizing 2x Sup 7E. The sups are currently running a very old IOS XE version 03.02.05.SG and ROM version 15.0(1r)SG5. When attempting to upgrade to 03.08.06E I noticed that the supervisors would no...
I have a 4510R+E that is utilizing 2x Sup 7E. When attempting to use SSO as the desired redundancy mode, I am able to configure it but the Modules state they are operating in RPR, which is obviously quite inferior to SSO. I have attempted ...
Hi. Are there any switch commands that will detail which hosts use a particular link in an etherchannel. i.e. on one of our 2960x switch stacks, 2 x 10Gb links are bundled in an etherchannel to a core switch. The...