I have an Cisco ASA5505 that i have just been using as an simple stage router for providing DHCP. But in the current state i need to have it running thr anouther router hooked to a switch. The Cisco router And my main router is in their own VLAN on the switch.
I dont get internet on what i have connected to my ASA. And i think it has to do with my NAT so i tried to do "Access-list 100 permit ip 192.168.50.239 255.255.255.0" wich is the static ip my main router has given my ASA but when i try to execute it it just retuns with "IP Adress, Mask <192.168.50.239, 255.255.255.0> doesn't pair" And it dossent fully make sense in my head since it took an /24 subnet just fine when i sat up my VLANs