02-21-2013 11:11 AM
Hello,
I have Cisco Prime 4.2 and several 3560X switches. I want to enable energywise on then but after doing the Readiness Assessment they apper like "Hardware not Capable". As far as I know the 3560X do support energywise.
The switches details:
WS-C3560X-48T-S running IOS 15.0(1)SE3 (C3560E-UNIVERSALK9-M).
Does anybody know if it might be a Prime bug? Or if those switches do not support energywise?
Thanks.
Ricardo
Solved! Go to Solution.
02-22-2013 01:08 PM
I've got EnergyWise enabled. It's s bug on PI.
Sent from Cisco Technical Support iPhone App
02-21-2013 03:49 PM
Can you post the output to the command "sh energywise version"?
02-22-2013 07:47 AM
Here is the output. I enabled Energiwise on it manually, but it still appears as hardware incapable on the Prime.
#show energywise vers
EnergyWise is Enabled
IOS Version: 15.0(1)SE3
EnergyWise Specification: (rel2_7_3k)1.0.3
02-22-2013 01:08 PM
I've got EnergyWise enabled. It's s bug on PI.
Sent from Cisco Technical Support iPhone App
02-25-2013 02:28 PM
Thanks for your response. After erasing and adding the switches a couple of times it worked; however, I'm still having issues discovering the endpoints as IP Phones. I'll open a new case for that.
Thank you!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: