02-26-2006 05:27 PM
Hi I recently bought a new 871.
It seems to work fine, but I am having some trouble with SDM 2.2 - when I try to create an advanced firewall, I am unable to select anything except for SDM_Low....the slider appears, but SDM_Medium and High are grayed out and unselectable.
I have pasted the output from show version below.
Has anyone seen this before and if so how did you solve this?
I have contacted Cisco and an engineer was able to reproduce this, but they have been slow to respond and I would like to know whats going on. In and of itself this iss not a huge deal, I can create my own inspection rules, but if this isnt working it makes me wonder if other things arent working correctly also.
Thanks in advance for your help,
Mike
Cisco IOS Software, C870 Software (C870-ADVIPSERVICESK9-M), Version 12.3(8)YI2, RELEASE SOFTWARE (fc1)
Synched to technology version 12.3(10.3)T2
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by Cisco Systems, Inc.
Compiled Tue 14-Jun-05 18:58 by ealyon
ROM: System Bootstrap, Version 12.3(8r)YI2, RELEASE SOFTWARE
ROM: Cisco IOS Software, C870 Software (C870-ADVIPSERVICESK9-M), Version 12.3(8)YI2, RELEASE SOFTWARE (fc1)
router uptime is 5 hours, 19 minutes
System returned to ROM by reload at 15:08:46 PCTime Sun Feb 26 2006
System restarted at 15:06:52 PCTime Sun Feb 26 2006
System image file is "flash:c870-advipservicesk9-mz.123-8.YI2.bin"
Last reload reason: Reload command
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
Cisco 871 (MPC8272) processor (revision 0x200) with 118784K/12288K bytes of memory.
Processor board ID FHK100320UX
MPC8272 CPU Rev: Part Number 0xC, Mask Number 0x10
5 FastEthernet interfaces
128K bytes of non-volatile configuration memory.
28672K bytes of processor board System flash (Intel Strataflash)
Configuration register is 0x2102
03-02-2006 02:30 PM
not sure of the issue, may be you can check out the following link for troubleshooting :
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide