A serious problem for LMS 4.1

[CSCO11616177]

Hi guys,

        1.When I want to add a CPU alarm, prompted me:

"

Message

Failed to Create Alarm !

Cause

1)Could be invalid value for some of the entries

2)Could be due to lack of access to the host,invalid SNMP credentials or a busy device.

Action

1)Verify the values entered for all the entries.

2)Verify that the Alarm Variable resolves to one of the following ASN.1 primitive types

. INTEGER

. Integer32

. Counter32

. Counter64

. Gauge

. TimeTicks

3) Verify access, SNMP credentials or increasing timeout value through

Message
Failed to Create Alarm !

Cause
1)Could be invalid value for some of the entries
2)Could be due to lack of access to the host,invalid SNMP credentials or a busy device.

Action
1)Verify the values entered for all the entries.
2)Verify that the Alarm Variable resolves to one of the following ASN.1 primitive types
. INTEGER
. Integer32
. Counter32
. Counter64
. Gauge
. TimeTicks
3) Verify access, SNMP credentials or increasing timeout value through

        2.After I  enable HTTPS ,login LMS finished entering username password I need to manually modify the port number. Link

I need change 1741 to  443, otherwise, can not access

3.Topology Services. It prompts me to download Java again and again

Every time I have installed have prompted this

But have not been able to properly display

Help me, please

Thanks a lot

[AFROJ AHMAD]

Hi ,

For the First issue :: try to delete and re-add the device ,make sure you have the correct SNMP credentilas

Second Issue:

Delete the existing shortcut and create new one by following the below steps.

1.       Right click on the