cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

192
Views
0
Helpful
5
Replies

%AAA-3-BADSERVERTYPEERROR: Cannot process accounting server type tacacs+ (UNKNOWN)

Estou com varios alarmes de TACACS no meu router, porém não estou achando nunhum erro parecido para o meu problema na internet.

 

15 de agosto 19: 44: 00.049:% DOMAIN-5-TCA: TCA recebido. Detalhes: ID da instância = 0: VRF = padrão: ID do site de origem = xxxx: ID do site de destino = xxxx: TCA-ID = 177812: TCA-Origem = xxxx (R): saída = [CHAN-ID = 7943, BR-IP = xxxx, DSCP = af21 [18], Interface = Tunnel11, Caminho = INET [label = 0: 11 | 0: 0 [0xB0000]]]: Política violada = navegação: limites (real / config) = [P1 = taxa de perda de bytes (2.16 / 2.0)], [P1 = taxa de perda de bytes (2.16 / 2.0)] , [P1 = taxa de perda de bytes (2,16 / 2,0)], [P1 = taxa de perda de bytes (2,16 / 2,0)], [P1 = taxa de perda de bytes (2,16 / 2,0)], [P1 = byte taxa de juros (2,16 / 2,0)]

15 de agosto 19: 44: 00.049:% DOMAIN-5-TCA: TCA recebido. Detalhes: ID da instância = 0: VRF = padrão: ID do site de origem = xxxx: ID do site de destino = xxxx: TCA-ID = 177812: TCA-Origem = xxxx (R): saída = [CHAN-ID = 7943, BR-IP = xxxx, DSCP = af21 [18], Interface = Tunnel11, Caminho = INET [label = 0: 11 | 0: 0 [0xB0000]]]: Política violada = navegação: limites (real / config) = [P1 = taxa de perda de bytes (2.16 / 2.0)]


15 de agosto 19: 44: 00.050:% DOMAIN-5-TCA: TCA recebido. Detalhes: ID da instância = 0: VRF = padrão: ID do site de origem = xxxx: ID do site de destino = xxxx: TCA-ID = 177812: TCA-Origem = xxxx (R): saída = [CHAN-ID = 7943, BR-IP = xxxx, DSCP = af21 [18], Interface = Tunnel11, Caminho = INET [label = 0: 11 | 0: 0 [0xB0000]]

Aug 15 19: 44: 42.807:% AAA-3-BADSERVERTYPEERROR: Não é possível processar tacacs do tipo de servidor de contabilidade + (DESCONHECIDO)

 

Estou usando o roteador ISR4221 / K9 versão 16.06.03 Everest 

5 REPLIES 5
Highlighted
Rising star

Re: %AAA-3-BADSERVERTYPEERROR: Cannot process accounting server type tacacs+ (UNKNOWN)

 

 - Make sure you have a TACACS server configured  : 

         https://www.cisco.com/c/en/us/td/docs/security/asa/asa91/configuration/general/asa_91_general_config/aaa_tacacs.pdf

 M.

Re: %AAA-3-BADSERVERTYPEERROR: Cannot process accounting server type tacacs+ (UNKNOWN)

Yes, I have tacacs set up.

All settings and authentication password have been validated.

Rising star

Re: %AAA-3-BADSERVERTYPEERROR: Cannot process accounting server type tacacs+ (UNKNOWN)

 

 - Ok. check the TACACS server's logs too when an authentication attempt is done from the switch. Are there any errors observed (e.g.) ?

 M.

Re: %AAA-3-BADSERVERTYPEERROR: Cannot process accounting server type tacacs+ (UNKNOWN)

Note: We checked the password that is set on the Routers and Tacacs server (ACS) and found that in addition to being correct the connections are being authenticated, however we continue with the session breaks and the message in APIC: ERROR-CONECTION-CLOSED and on routers:% AAA-3-BADSERVERTYPEERROR: Cannot process authentication server type tacacs + (UNKNOWN).

Rising star

Re: %AAA-3-BADSERVERTYPEERROR: Cannot process accounting server type tacacs+ (UNKNOWN)

 

  - Could be a software bug , if applicable check more recent releases for your platform.

  M.

CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards