Active DS0 T1

[tpfrankli]

Hello,

I'm trying to use Cacti to monitor active DS0 utilization on my ISR voice gateways. These range from 2811 - 3845 platforms. I'm a little at a loss for what OID to query.

I've tried:

1.3.6.1.4.1.9.10.19.1.1.9.1

I even ran an SNMP explorer on this 2811 looking for a MIB that makes sense but I'm lost. If someone could identify the OID I need to query that would be much appreciated. Also any tips on identifying MIBs would be great. The Cisco MIB tool is just confusing to me.

Thank you.

[tpfrankli]

It looks as though OID 1.3.6.1.4.1.9.10.19.1.1.4 might be on the one I want this shows all active DS0 channels on the platform. We'll see it I get any data out of it.

[tpfrankli]

Still not getting anywhere. Best I can identify is the following:

Current active DSO:

1.3.6.1.4.1.9.10.19.1.1.9.1.3.x where X = port number so for slot 0/1/0 I think the OID should be:

1.3.6.1.4.1.9.10.19.1.1.9.1.3.0.1

All time high DS0:

1.3.6.1.4.1.9.10.19.1.1.9.1.4.x where X = port number so for slot 0/1/0 I think the OID should be:

1.3.6.1.4.1.9.10.19.1.1.9.1.4.0.1

Can anyone confirm if I'm at all on the right track here?