I'm aware this post is over 1 year old, but perhaps this will give a hint to someone in the future.
As far as I remember, APIC-EM is not able to do dialogues while deploying config via PnP - even with bootstrapping.
Possible the best way to go about this is to create an EEM script and assign the script to the config that will be deployed. Note: Add some delay to the script start, since an immediate start can cause problems with APIC-EM config deployment. I used 20/30 seconds. Tests with immediate start caused the provisioning process to fail midway.
how do we restrict a router interfaces from directly connected to Some vlans? can any one help me to figureout?the question is Router should not have interfaces directly connected to Vlan 30 and Vlan 40
I've got a one problem. Me and my friend have the same ISP. I checked my External IP address at WhatIsMyIp.com and my friend do it to. And we saw we have the same External IP.So my question is can 2 routers have the same External IP address?If i'm right 2...
LISP Protocol (Location Identifier Separation Protocol)! - The LISP protocol has become a brilliant stardom with the digital transformation that we are now experiencing. - Today we will talk about the LISP protocol and its advantages and method of p...
SD-Access provides automated end-to-end services (such as segmentation, quality of service, and analytics) for user, device, and application traffic. SD-Access automates user policy so organizations can ensure the appropriate access control and applicati...