08-22-2011 08:51 AM
I have a ASA5510 ASA v7.0.8 in routed firewall mode. It is setup as the internal router and default gateway.
I was asked to set up a wireless router, I chose a D-Link DIR-815 (we are a small buisiness).
I have it all set up but I cannot get any name resolution.
The firewall is blocking traffic that is all internal. To clarify, it is only blocking the DNS traffic from the D-Link wireless router, the rest of the network operates just fine.
the message in the ASA log is like the following:
Deny inbound UDP from 192.168.1.246/xxxx to 192.168.1.10/53 due to DNS Query.
.246 being the "WAN" port my wireless router and .10 being my DNS server.
I tried adding an ACL "access-list dns extended permit udp any eq 53 any" but this didn't help.
Any ideas? Thanks.
08-22-2011 11:09 AM
To let anyone know, if I take the same IP settings from the wireless router WAN port and put them on the LAN settings and use it like an AP it all works just fine.
12-01-2012 08:06 PM
Do you have the ACL on the right interface? Where are your access-group commands?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide