06-06-2019 08:03 AM
Hi,
is it possible to get any temperature information via SNMP for an ASA 5516?
If yes - which OID and MIB do I need for this?
Solved! Go to Solution.
06-06-2019 08:29 AM
We use 1.3.6.1.2.1.99.1.1.1.4 to obtain the temperature values for our 5525s it might be the same for the 5516s
1.3.6.1.2.1.99.1.1.1 is the table if you need any more info around the values.
Hopefully this is helpful.
06-06-2019 08:29 AM
We use 1.3.6.1.2.1.99.1.1.1.4 to obtain the temperature values for our 5525s it might be the same for the 5516s
1.3.6.1.2.1.99.1.1.1 is the table if you need any more info around the values.
Hopefully this is helpful.
06-12-2019 07:33 AM
Thank you. This is working. I found one item that seems to be the fan. And then three temperatures (I don't know which temperatures exactly these are but they have all a similar value at the moment).
06-12-2019 08:50 AM
I ran into a similar issues creating custom sensors in our monitoring solution. I ran show environment temperature on the ASA and cross referenced with the values when I did an SNMP walk on the OID.
The 4 temperature values should be for the processor, chassis back, chassis front and chassis back left according to sho env temp. The processor value will be the highest.
06-06-2019 08:35 AM
snmpwalk with below oid
ciscoEnvMonTemperatureStatusTable 1.3.6.1.4.1.9.9.13.1.3
entitySensorMIBObjects 1.3.6.1.4.1.9.9.91.1
06-12-2019 07:35 AM
This is not working in my case.
CISCO-ENVMON-MIB::ciscoEnvMonTemperatureStatusTable = No Such Object available on this agent at this OID
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide