I have problem with setting up ASACX module on my ASA 5545. I have installed ASACX completely, even gave it an IP address. I can ping the ASACX and I can login to its console from ASA console session. But the problem is that nothing shows in my ASDM, also when I run "show module" on the asa, nothing about ASACX shows up. I'm installing ASACX version asacx-5500x-boot-184.108.40.206 image and below is the output of "show module" after installing ASACX. Does anyone knows what the problem is!!???
0 ASA 5545-X with SW, 8 GE Data, 1 GE Mgmt ASA5545
cxsc Unknown N/A
Mod Status Data Plane Status Compatibility ---- ------------------ --------------------- ------------- 0 Up Sys Not Applicable ips Unresponsive Not Applicable cxsc Recover Not Applicable sfr Unresponsive Not Applicable
Join us live on Tuesday, March 9 at 10 am PT (and on demand after) as we take a closer look at the WAN architecture innovations that Cisco has to offer.
We'll take your questions live during the broadcast (and after), so post them below in the comments.
Hello everybody,I am newbies with setting cisco switch.I downloaded Catalyst 2960-X Switch Getting Started Guide but I can't access to Device Manager - Express Setup according to guide.If you follow the instructions and try to keep all LEDs (exc...
To participate in this event, please use the button to ask your questions
Ask questions from Monday, March 8 to Friday, March 19, 2021
All the knowledge of these four experts at your disposal!
Cisco Software-Defined Wide Area Network (SD-WAN) provid...
Community Live- ISR1100X-4G and ISR1100X-6G Platform Overview and Architecture
(Live event - Tuesday, 23 March, 2021 at 10:00 am Pacific/ 1:00 pm Eastern / 7:00 pm Paris)-
This event will have place on Tuesday 23rd, March 2021 at 10:00 hrs PDT&...