11-27-2017 04:30 PM - edited 03-01-2019 06:16 PM
This topic is a chance to discuss more about Layer 3 multicast and the best practices to identify possible threats and take security measures. Ask your questions about basic multicast, the best security practices for use of this technology, and recommendations for how to configure an auto rendezvous point (RP) and Bootstrap (BSR) in multicast protocols, particularly on RP distribution methods. This event includes a live demonstration of Layer 3 multicast technology
To participate in this event, please use the button below to ask your questions
Ask questions from Monday 20th, November to Friday 8th December 2017
Luis Espejel is the Telecommunications Manager of IENova, an Oil & Gas company. Currently he works with Cisco IOS® and Cisco IOS XE platforms, and NX to some extent. He has also worked as a Senior Engineer with the Routing Protocols team in Cisco’s Global Technical Assistance Center (TAC), as a Network and Telecommunications Manager for GM’s Mexico subsidiary, and in the Engineering Department for Axtel, a major Internet Service Provider. Luis holds an Electronics and Communication degree and postgraduate degrees, one in marketing and one in telecommunications. He has several certifications such as Google Power Search, ITIL foundations, Certified Ethical hacker, CCNA in DC, Cybersecurity Specialist, and a CCIE in R&S (#52804) among others.
Miguel Perez is a Customer Support Engineer at the Cisco Technical Support Center at the Routing protocols team, where he has been collaboration in the past 3 years. Before he has worked Getronics, a Cisco partner, and in AT&T as a Support Engineer. Miguel holds a Bachelor’s Degree in Electronics and Communication engineering. He holds several certifications such as: CCNA, CCNP, CCDA and CCDP.
Luis and Miguel might not be able to answer each question due to the volume expected during this event. Remember that you can continue the conversation on the Contact Center Community
Find more information regards this topic https://supportforums.cisco.com/t5/network-infrastructure/ct-p/4461-network-infrastructure
**Ratings Encourage Participation! **
Please be sure to rate the Answers to Questions
11-30-2017 04:30 AM
Can you upload the video recording and Q&A session
11-30-2017 03:26 PM
12-05-2017 01:30 PM
Could you please help to answer these questions from the a live session:
What issues are introduced with using VSS or VPC in the core?
Do you know how to harden Multicast environment?
What are the possible threats to Multicast?
Are there any security best practices?
11-30-2017 10:45 AM
Hi Luis and Miguel
Thanks for the Webcast session, we learn a lot.
Please help to answer the questions that weren't covered during the alive session:
Do you recommend to use 239/8 or not to use it?
This this still the same issue if you have the 7Ks as your RP router?
When you mention 224.0.40? You mean Auto RP
11-30-2017 11:44 AM - edited 11-30-2017 11:47 AM
Regarding if you should use 22.214.171.124/8, consider that segment is private, it's the analog for 10.0.0.0/8, meaning you have to use it in your organization.
Please consult Multicast Address ranges from IANA:
11-30-2017 11:59 AM
Regarding Nx7K, please share specific questions you may have.
Here's a brief guide to start with Multicast in NX7K.
And the configuration guide:
11-30-2017 12:01 PM - edited 11-30-2017 01:20 PM
when I mention 126.96.36.199 I mean AutoRP discovery messages.
Those messages are sent by the RP Mapping agent to inform all PIM routers of available RP candidates in the network. Those candidates inform the mapping agent with RP announcement messages using 188.8.131.52 to share it's IP address and what groups they are working with as RP.
12-05-2017 10:30 AM
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: